7961 Results
Obtain fast data reading for realtime filter tuning with the R&S®ZNB vector network analyzer from Rohde & Schwarz.
27-Nov-2019
RMS is one of the most common parameters in test and measurement. Mathematically, it is the quadratic mean of continuously varying values (waveform). R&S RTM-K32 option provides a digital RMS conversion function for a high-bandwidth RMS measurement.
17-Aug-2015
This application note summarizes the Rohde &Schwarz test solutions for LTE-Advanced (Release 10) using Vector Signal Generators, Signal and Spectrum Analyzers and the Wideband Radio Communication Tester.
03-Sep-2014 | AN-No. 1MA166
You need a flexible clock source that can provide the signals needed for today’s and tomorrow’s designs with minimal jitter and noise as well as best spectral purity.
03-Aug-2017
This application card will give some guidance as to the possible combinations of bandwidth options and mixers in conjunction with the needed IF frequencies.
16-Jun-2020
Thanks to their multichannel capability, oscilloscopes are ideal for multichannel applications such as the analysis of MIMO, multi-antenna radar and differential high-speed digital signals.
06-May-2020
The R&S ® TSStream multi-TS streaming software streams a number of MPEG transport stream files simultaneously over a single IP interface.
16-Mar-2017 | AN-No. 1GP113
The R&S®Scope Rider is a handheld oscilloscope that features superior performance at the highest safety standards, combined with the debugging functionalities of a benchtop oscilloscope.
30-Dec-2015
This application note describes the basic frequency filter measurements that are often required during service repairs, during development and for training purposes.
27-Mar-2015 | AN-No. 1MA243
This application note focuses on how to measure and analyze FMCW radar signals with up to 6 GHz bandwidth with an R&S® RTP oscilloscope.
07-Aug-2019 | AN-No. GFM318
Antenna Measurements, RCS Measurements and Measurements on Pulsed Signals with Vector Network Analyzers R&S ZVM, R&S ZVK
10-Sep-2004 | AN-No. 1EZ52
This application note aims to explain test procedures and characterization of the relevant parameters for active phased array antennas.
04-Jul-2016 | AN-No. 1MA248
This document describes WLAN tests which rely on communication (signaling) between R&S CMW and device under test (DUT) and on transmission of packet data over WLAN. On the R&S CMW side the WLAN Signaling application is required, for some tests also the Data Application Unit (DAU). The test principles and the necessary settings are explained and background infor-mation is given. Step-by-step procedures are provided for the main configuration tasks.
08-Feb-2016 | AN-No. 1C107
For measurement settings below 10 mV/div, oscilloscopes typically reduce the measurement bandwidth in order to keep the trace noise as low as possible. The R&S®RTO is different: It offers the full bandwidth even for the most sensitive settings, and an A/D converter with more than 7 effective bits (ENOB) digitizes the signal.
13-Jul-2012
Importing Data in ARB, Custom Digital Modulation and RF List Mode
22-Dec-2010 | AN-No. 1GP62
This application note describes the necessary settings in the user interface of the R&S® Broadcast Test Center BTC which supports the new “Next Generation Broadcast Standard ATSC 3.0” with BTC firmware version 2.20 and later.
27-Mar-2018 | AN-No. 1GP119
The R&S®RTx-K36 frequency response analysis (Bode plot) option displays the system response to changes in operating conditions, such as supply voltage changes.
29-Dec-2018
Software tool for fast and repeatable optimization of signal analyzer RF front-end settings
The signal conditioning in the RF front-end of signal analyzers is crucial to achieve the best performance with respect to image-suppression, noise-floor, dynamic range and other RF-key parameters.Precise signal levelling is especially important for complex measurements like Error-Vector-Magnitude (EVM). To minimize the measurement uncertainty from test system contributions over a wide range of different levels, the RF front-end needs to be adapted continuously according to the signal characteristics, signal power and frequency - ideally using an automatic levelling algorithm.This document describes the approach of a waveform specific, on-site characterization of the signal analyzer: For each waveform and frequency of interest, the instrument is evaluated in a first step. With this additional data, a fast and repeatable auto-levelling can be performed during the actual measurement.
24-Jan-2022 | AN-No. 1EF111
This application note describes methods using an R&S®ZVA network analyzer to accurately measure all the key parameters of frequency converters.
30-Apr-2015 | AN-No. 1MA224
R&S®ZNB offers all the functionality needed to test digital high-speed signal structures on PCBs in one box.
20-Sep-2016
WCDMA RF Measurements with the R&S<sup>®</sup>CMW500 according to 3GPP TS 34.121
16-Dec-2011 | AN-No. 1CM95
1MA210 - Testing LTE Release 9 Features. This Application Note describes the T&M methods for LTE Release 9 features using Rohde & Schwarz instruments.
26-Apr-2013 | AN-No. 1MA210
How to perform automated GNSS receiver tests using the R&S®SMBV100A vector signal generator. The presented tests include TTFF, sensitivity, and location accuracy measurements, moving receiver and interference tests, and many more.
29-Jul-2014 | AN-No. 1GP86
Converting Existing Waveform Files from R&S AMIQ or Binary into R&S SMU200A or R&S AFQ100A Format
18-Jun-2009 | AN-No. 1GP64
Comprehensive test solutions guide for production and R&D
Small cell is a compact base station with smaller form factor and lower transmission power in comparison to the conventional macro base station. It covers relatively small area and serves less users. Usually, small cell can be integrated into the existing mobile network. By the evolution of radio access technology, the role of small cell has been changing through the evolution path. In the 2G/3G time, its role was to provide coverage in corner cases. Later during LTE, networks are not just providing coverage but capacity too. Small cells were then used to provide the addition capacity where required without adding additional spectrum. Now in 5G era, network operators use densification as an important strategy to provide seamless 5G services which demand coverage, capacity and performance too. With use cases requiring the 5G millimeter wave (mmW) rollouts, it makes sense to use small cells for densification due to the propagation characteristics of mmW.In this application note, we will shed light on the testing aspects of a small cell throughout the product life cycle with particular focus on the production test solution for the small cell device under test (DUT) in FR2 (frequency range 2, mmW frequency band) in Over the Air (OTA) environment for option 6 split based on radio communication tester R&S®CMP200 and OTA chamber R&S®CMQ200. The document is complemented with more insights into test solutions used in typical R&D test applications towards the second half of the application note.
19-Jun-2023 | AN-No. 1SL395
This application note describes how to detect even small fails in dynamic turn indicators with R&S®AdVISE.
30-Jul-2020 | AN-No. 1S006
Learn more about the R&S®SFC and how it supports all conventional digital and analog TV and audio broadcast standards.
19-Feb-2015
The document gives an overview and user guide about a link budget calculator for the main components of a basic OTA system. Accomopanied by an Excel sheet containing the Link Budget Calculator.
19-Mar-2019 | AN-No. 1EF104